附件

Warning此界面是exocad2023以后的版本。 老版本软件请参考


附件功能观看视频教程： 附件功能


附件

附件功能在每个自由造型步骤均可用。

  • 首先从合作伙伴提供的数据库中选择一个附件。
  • 然后点击修复体将所选附件添加到修复设计上。默认情况下，附件方向将平行于修复体的就位道方向。


    • ATT 1 3.2.png


    • 要添加所选择的附件选择 添加 [1].


    • 要使用附件移除或布尔运算请选择 移除 [2]。它可以使您从修复体设计中删除或剪切指定的几何形状。


    • 附件数据库和类型 [3].


    • 您可以通过鼠标左键拖动附件来 移动 [4]。


    • 点击旋转 [5]围绕就位道方向旋转。


    • 缩放 [6] 仅适用于少数指定的附件数据，因为对于大多数附件，几何形状均不允许更改。


    • 设置附件方向[7] 为修复体顶部或者 视图方向或垂直于表面。在设计种植修复体时，还有更多的就位道方向选项。


    • 勾选适应牙龈调整[8] 如果您希望使附件适应牙龈并选择所需的距离。正值附件与牙龈之间有间隙，负值则有交叉。


    • 当点击应用按钮， 附件将适应牙龈调整并与修复体融合。你可以点击删除 [9]来移除当前放置的附件或者在自由造型中隐藏。
    Tip 与Delete键有同样效果的操作


    参数设计

    您可以使用参数设置（扁平形） 功能来创建附件。

    ATT 2 3.2.png

  • 从“类型”窗口的下拉菜单中选择所需的横截面文件，所选轮廓将沿视图轴拉伸。

    • ATT 3.png

  • 每个类型文件可以通过几个参数进行调整和设计。
  • 如果您想再次使用调整后的类型文件，你可以保存调整后的类型文件

    • ATT 4.png

  • 稍后加载保存的类型文件

    • ATT 5.png

  • 请按住鼠标左键拖动放置附件，除非您已点击 应用，你仍可以更改附件设计即使已经放置好

    • ATT 8 3.2.png

  • 参数设置（圆柱形）选项，将按附件轴向旋转。和参数设置（扁平形）里面的数据库相同。

    • ATT 6 3.2.png


    文字附件

  • 你可以添加文字到修复体设计。
  • 输入想要添加的文字信息。
  • 将文字信息放置在修复体上。
  • 你可以使用滑动条调整文字大小和厚度。

    • ATT 7 3.2.png

    除了提供的数据库和参数设置中，您还可以导入自己的stl文件作为附件设计。

    Hotkey“附件”模式下可用的快捷键。

    通过鼠标点击放置附件后，即可通过鼠标移动它。 按住 SHIFT 围绕就位道方向移动 按住 CTRL 围绕就位道方向旋转

    按住 CTRL+SHIFT 自由旋转


    数据库

    Blijdent
    Conisch handvat.sdfa Lepel handvat kort.sdfa Lepel handvat lang.sdfa Lepel handvat schein small.sdfa Lepel handvat schein.sdfa Steun Lepel.sdfa
    Att-Blijdent-Conisch-handvat.png Att-Blijdent-Lepel-handvat-koft.png Att-Blijdent-Lepel-handvat-lang.png Att-Blijdent-Lepel-schuin-small.png Att-Blijdent-Lepel-handvat-schuin.png Att-Blijdent-Steun-Lepel.png


    Bredent
    LV1-Retention.sdfa Vario-Kugel-Snap oc 1.7mm.sdfa Vario-Kugel-Snap oc 2.2mm.sdfa Vario-Kugel-Snap sg 1.7mm.sdfa Vario-Kugel-Snap sg 2.2mm.sdfa
    Att-Bredent-LV1-Rtention.sdfa.png Att-Bredent-Vario-Kugel-Snap-oc1.7mm.sdfa.png Att-Bredent-Vario-Kugel-Snap-oc2.2mm.sdfa.png Att-Bredent-Vario-Kugel-Snap-sg1.7mm.sdfa.png Att-Bredent-Vario-Kugel-Snap-sg2.2mm.sdfa.png
    Vario-Kugel-Snap threat sleeve 1.7mm.sdfa Vario-Kugel-Snap threat sleeve 2.2mm.sdfa Vario-Soft3 mini sv.sdfa Vario-Soft3 mini.sdfa Vario-Soft3 sv.sdfa
    Att-Bredent-Vario-Kugel-Snap-threatsleeve1.7mm.sdfa.png Att-Bredent-Vario-Kugel-Snap-threatsleeve2.2mm.sdfa.png Att-Bredent-Vario-Soft3-mini-sv.sdfa.png Att-Bredent-Vario-Soft3-mini.sdfa.png Att-Bredent-Vario-Soft3-sv.sdfa.png
    Vario-Soft3.sdfa Vario-Soft Steg attachment.sdfa Vario-Soft Steg bar attachment.sdfa
    Att-Bredent-Vario-Soft3.sdfa.png Att-Bredent-Vario-Soft-Steg.sdfa.png Att-Bredent-Vario-Soft-Steg-bar.sdfa.png


    C+M_Dalbo
    Dalbo-Hole.sdfa
    Att-CM-Dalbo-Hole.sdfa.png


    C+M_M-SG_Star
    M-SG_Star.sdfa
    Att-CM-M-SG Start.sdfa.png


    C+M_Mini-SG
    Mini-SG-Male-part.sdfa
    Att-CM-Mini-SG-Male-part.sdfa.png


    C+M_SG Geschiebe
    SG Male part.sdfa
    Att-CM-SG-Male-part.sdfa.png


    CEKA PRECI LINE
    CEKA REVAX M2 female keeper 30.sdfa CEKA REVAX M2 female keeper 45 No Plate.sdfa CEKA REVAX M2 female keeper 45.sdfa CEKA REVAX M2 female keeper 60.sdfa CEKA REVAX M3 female keeper 30.sdfa
    CEKA-REVAX-M2-female-keeper30.sdfa.png CEKA-REVAX-M2-female-keeper45-NoPlate.sdfa.png CEKA-REVAX-M2-female-keeper45.sdfa.png CEKA-REVAX-M2-female-keeper60.sdfa.png CEKA-REVAX-M3-female-keeper30.sdfa.png
    CEKA REVAX M3 female keeper 45 No Plate.sdfa CEKA REVAX M3 female keeper 45.sdfa CEKA REVAX M3 female keeper 60.sdfa PRECI-CLIX male keeper 30.sdfa PRECI-CLIX male keeper 45 No Plate.sdfa
    CEKA-REVAX-M3-female-keeper45-NoPlate.sdfa.png CEKA-REVAX-M3-female-keeper45.sdfa.png CEKA-REVAX-M3-female-keeper60.sdfa.png CEKA-CLIX-male-keeper30.sdfa.png CEKA-CLIX-male-keeper45-NoPlate.sdfa.png
    PRECI-CLIX male keeper 45.sdfa PRECI-CLIX male keeper 60.sdfa PRECI-VERTIX male No Plate.sdfa
    CEKA-CLIX-male-keeper45.sdfa.png CEKA-CLIX-male-keeper60.sdfa.png PRECI-VERTIX-male-NoPlate.sdfa.png


    Generic
    Default.sdfa Generic-PR-V-slim-short.sdfa Generic-PR-V.sdfa Generic-VS.sdfa
    Att-Generic-Default.sdfa.png Att-Generic-PR-V-slim-short.sdfa.png Att-Generic-PR-V.sdfa.png Att-Generic-VS.sdfa.png


    GeoMedi MultiUnit
    mmu-48-1.0.sdfa mmu-48-2.0.sdfa mmu-48-3.0.sdfa mmu-55-1.0.sdfa mmu-55-2.0.sdfa mmu-55-3.0.sdfa
    Mmu-48-1.0.sdfa.png Mmu-48-2.0.sdfa.png Mmu-48-3.0.sdfa.png Mmu-55-1.0.sdfa.png Mmu-55-2.0.sdfa.png Mmu-55-3.0.sdfa.png


    NobilMetal LV Kon-R16
    KN-852-W-2gradi.sdfa KN-852-W-2.sdfa
    KN-852-W-2.sdfa.png KN-852-W-2.sdfa.png


    NobilMetal LV R1606
    SG-1.7.sdfa SG-2.2.sdfa SP-TI45_A.sdfa SP-TI45_B.sdfa SP-TI60.sdfa
    SG-1.7.sdfa.png SG-2.2.sdfa.png SP-TI45 A.sdfa.png SP-TI45 B.sdfa.png SP-TI60.sdfa.png
    VR-3.5.sdfa VR-4.0.sdfa VR-4.5.sdfa VR-5.0.sdfa VR-5.5.sdfa
    VR-3.5.sdfa.png VR-4.0.sdfa.png VR-4.5.sdfa.png VR-5.0.sdfa.png VR-5.5.sdfa.png


    Phibo
    A1-VERTICAL-30°_1.7_exocad.sdfa A13-BOLA-1.7_CO-CR_exocad.sdfa A14-BOLA-2.2_CO-CR_exocad.sdfa A2-VERTICAL-60°_1.7_exocad.sdfa A3-VERTICAL-30°_2.2_exocad.sdfa
    A1-VERTICAL-30 1.7 exocad.sdfa.png A13-BOLA-1.7 CO-CR exocad.sdfa.png A14-BOLA-2.2 CO-CR exocad.sdfa.png A2-VERTICAL-60 1.7 exocad.sdfa.png A3-VERTICAL-30 2.2 exocad.sdfa.png
    A4-VERTICAL-60°_2.2_exocad.sdfa A5-BOLA ROACH-1.7_exocad.sdfa A6-BOLA ROACH-2.2_exocad.sdfa
    A4-VERTICAL-60 2.2 exocad.sdfa.png A5-BOLA-ROACH-1.7 exocad.sdfa.png A6-BOLA-ROACH-2.2 exocad.sdfa.png


    Rhein83
    OT Bar-Castable Bar.sdfa OT Cap-Mirco-2mm Thread.sdfa OT Cap-Mirco-Extension Arm.sdfa OT Cap-Normal-2mm Thread.sdfa OT Cap-Normal-Extension Arm.sdfa
    OT-Bar-Castable.sdfa.png OT-Cap-Mirco-2mm-Thread.sdfa.png OT-Cap-Mirco-Extension-Arm.sdfa.png OT-Cap-Normal-2mm-Thread.sdfa.png OT-Cap-Normal-Extension-Arm.sdfa.png
    OT Equator-2mm Thread.sdfa OT Strategy-male.sdfa OT Strategy-Steady.sdfa OT Tenco-Extension Arm.sdfa OT Vertical-Plus-Steady male.sdfa
    OT-Equator-2mm-Thread.sdfa.png OT-Stratey-male.sdfa.png OT-Stratey-Steady.sdfa.png OT-Tenco-Extension-Arm.sdfa.png OT-Vertical-Plus-Steady-male.sdfa.png


    Ring Donut
    Donut-Shape-1.sdfa Donut-Shape-2.sdfa Donut-Shape-3.sdfa Donut-Shape-4.sdfa Donut-Shape-5.sdfa
    Donut-Shape-1.sdfa.png Donut-Shape-2.sdfa.png Donut-Shape-3.sdfa.png Donut-Shape-4.sdfa.png Donut-Shape-5.sdfa.png
    Donut-Shape-6.sdfa Ring-Shape-3.sdfa Ring-Shape-4.sdfa Ring-Shape-5.sdfa
    Donut-Shape-6.sdfa.png Ring-Shape-3.sdfa.png Ring-Shape-4.sdfa.png Ring-Shape-5.sdfa.png


    Servo-dental
    132111300.sdfa 132111300-SLM.sdfa 134141300-SLM.sdfa 134151300.sdfa 69977E.sdfa
    132111300.sdfa.png 132111300-SLM.sdfa.png 134141300-SLM.sdfa.png 134151300.sdfa.png 69977E.sdfa.png


    Si-tec
    HHK_PRIMAERTEIL.sdfa SAFE-TEC_PRIMAERTEIL.sdfa
    HHK PRIMAERTEIL.sdfa.png SAFE-TEC PRIMAERTEIL.sdfa.png


    Sterngold
    Era-Micro-overdenture-male-with-metaljacket.sdfa Era-RV-Micro-male-metaljacket.sdfa Era-RV-Micro-male-without-metaljacket.sdfa Era-RV-Standard-male-with-metaljacket.sdfa Era-Standard-overdenture-female-Outline.sdfa
    Era-Micro-overdenture-male-with-metaljacket.sdfa.png Era-RV-Micro-male-metaljacket.sdfa.png Era-RV-Micro-male-without-metaljacket.sdfa.png Era-RV-Standard-male-with-metaljacket.sdfa.png Era-Standard-overdenture-female-Outline.sdfa.png
    Era-Standard-overdenture-male-metaljacket.sdfa Era-Standard-overdenture-male-without-metaljacket.sdfa Stern-Snap-Retaining-Cap.sdfa
    Era-Standard-overdenture-male-metaljacket.sdfa.png Era-Standard-overdenture-male-without-metaljacket.sdfa.png Stern-Snap-Retaining-Cap.sdfa.png


    TruAbutment DS
    All-on-T-1.0.sdfa All-on-T-2.0.sdfa All-on-T-3.0.sdfa T-LOC-1.0.sdfa T-LOC-2.0.sdfa T-LOC-3.0.sdfa
    All-on-T-1.0.sdfa.png All-on-T-2.0.sdfa.png All-on-T-3.0.sdfa.png T-LOC-1.0.sdfa.png T-LOC-2.0.sdfa.png T-LOC-3.0.sdfa.png


    Unor
    Mini-NPG.sdfa
    Mini-NPG.sdfa.png
    Retrieved from "https://wiki.exocad.com/wiki/index.php?title=附件&oldid=15200"