Partial Framework - Smooth Area

Smooth Area - for large areas that need smoothing, the alternate tool smooths all wax within a paint-selected area. Often used to smooth over certain types of extraction sites. To use, paint-select an area to be smoothed, set the parameters, and click Apply.

• The Toggle erase mode [1] paint-selects an area to delete from current area, use the Shift key to modify.
• The Select All [2] selects the entire model
• The Select None [3] de-selects the entire model
• Invert Selection [4] reverses the areas to be re-surveyed.
• Diameter [5] adjusts the size of the tool for painting and erasing areas to be smoothed.
• Blend with Mask [6] If the mask is used, controls if the masked area should have a sharp transition (default), or be smoothed (if checked)
• Wax only [7] Controls if Blockout Wax can be selected (un-checked), or only partial wax (checked).
• Feather Level [8] Controls how the edges of the smoothed area should be blended into the surrounding wax.
• Apply [9] Updates the preview to show the result of adjusting the feather level. Useful when visualizing smoothing of extraction sites
• Smooth Level [10] Overall Smoothness of the top of the new surface.
• Preserve Detail [11] Adjusts the amount of detail carried over from the bottom surface of the smoothed wax.
• Apply [12] Performs smoothing on the selected region. Control-Z to un-do.